SCRAP METAL PRICES
The scrap metal prices shown below are as of October 29, 2024. Scrap metal prices are subject to change due to market volatility.
Scrap Metal
|
Item |
Scrap Metal
|
| Aluminum | 3003 Aluminum | $0.60 |
| Aluminum | 5052 Aluminum | $0.60 |
| Aluminum | 6061 Extrusion | $0.50 |
| Aluminum | 6061 SPC | $0.30 |
| Aluminum | 6063 Bare Extrusion | $0.60 |
| Aluminum | Aluminum Rims | $0.50 |
| Aluminum | Cast Aluminum | $0.40 |
| Aluminum | Die Cast | $0.30 |
| Aluminum | Irony Extrusion | $0.25 |
| Aluminum | Old Sheet Aluminum | $0.35 |
| Aluminum | Painted Siding Aluminum | $0.50 |
| Brass | Red Brass | $2.70 |
| Brass | Yellow Brass | $2.00 |
| Copper | #1 Copper | $3.58 |
| Copper | #2 Copper | $3.45 |
| Copper | Bare Bright | $3.70 |
| Lead | Batteries | $0.10 |
| Motors/Cores | Alternators | $0.45 |
| Motors/Cores | Electric Motors (Small) | $0.20 |
| Motors/Cores | Sealed Units | $0.10 |
| Motors/Cores | Starters | $0.35 |
| Radiators | Aluminum Copper Radiators (Clean) | $1.55 |
| Radiators | Aluminum Radiators (Clean) | $1.00 |
| Stainless Steel | 304 Steel | $0.25 |
| Stainless Steel | 316 Steel | $0.60 |
| Steel | Auto Cast | $260/ton |
| Steel | Busheling | $255/ton |
| Steel | Clean Sheet | $145/ton |
| Steel | Prepared Heavy Melt | $180/ton |
| Steel | Prepared Plate & Structural | $200/ton |
| Steel | Steel | $140/ton |
| Steel | Steel Motor Blocks | $200/ton |
| Wire | #1 ICW 70% | $2.18 |
| Wire | #1 ICW 80% | $2.50 |
| Wire | #1 ICW 85% | $2.60 |
| Wire | #2 ICW 45% | $0.95 |
| Wire | ACSR | $0.20 |
| Wire | Communication Wire | $1.10 |
| Wire | Romex | $1.90 |
CURRENT PRICES
Prices are subject to change due to market volatility. Updated as of June 11th, 2024.
| ALUMINUM (PER POUND) |
|---|
| Al Litho Sheet: $0.35 |
| Al/Cu Radiators Clean: $1.58 |
| Al/Cu Radiators Dirty: $1.43 |
| Clean Alum Siding: $0.48 |
| Clean Bare MLC: $0.40 |
| Alum Wheels: $0.70 |
| Clean Chrome Wheels: $0.45 |
| Clean Al Radiators: $0.32 |
| Dirty Al Radiators: $0.20 |
| Aluminum Cans: $0.45 |
| Bare EC Wire: $0.65 |
| Bare 6063 Extrusion: $0.55 |
| Clean Painted Extrusion: $0.45 |
| Bare 3003 : $0.55 |
| Clean 5052 : $0.60 |
| High Grade Turnings: $0.20 |
| Clean 6061 Turnings: $0.22 |
| 6061 Clip: $0.35 |
| Clean Old Cast: $0.40 |
| Old Sheet : $0.37 |
| 6061 Alum Extrusion: $0.40 |
| Clean Extrusion: $0.45 |
| Old Cast 5% FE: $0.35 |
| Alum Breakage 25% FE: $0.10 |
| 6061 Truck Wheels: $0.40 |
| Irony Extrusion 5% FE: $0.40 |
| Thermal Extru No FE No ZN: $0.40 |
| Insulated Alum Wire: $0.40 |
| Alum Transformer: $0.09 |
| COPPER (PER POUND) |
| Bare Bright: $3.87 |
| #1 Cu: $3.75 |
| #2 Cu: $3.60 |
| #3 CU: $2.50 |
| Silver Plated Buss Bar: $3.87 |
| #1 Copper Buss Bar: $3.43 |
| Irony Copper 80% FE: $0.13 |
| BRASS (PER POUND) |
| Clean Brass Radiators: $1.58 |
| Yellow Brass Turnings: $1.38 |
| Rod Brass Turnings: $1.53 |
| Red Brass: $2.45 |
| Admiralty Tubes: $1.88 |
| EDM: $1.71 |
| Brass Shells: $2.03 |
| Water Meters: $2.13 |
| Irony Red Brass: $0.78 |
| Clean 70/30 Clip: $2.48 |
| Irony Brass 80% FE: $0.06 |
| Irony Brass Auto Rads: $0.28 |
| Yellow Brass: $2.00 |
| Dirty Plumbers Brass: $0.63 |
| INSUL COPPER WIRE (PER POUND) |
| #1 Ins Cable 90%: $3.10 |
| #1 Ins. Cable 85%: $2.90 |
| House Wire 80%: $2.80 |
| Cat5/Comm: $1.20 |
| Romex: $2.15 |
| Xmas Lights: $0.15 |
| Open Eye Heliax CU/CU: $1.20 |
| Closed Eye Heliax CU/CU: $0.05 |
| Lead / Copper Cable: $0.11 |
| #2 Wire: $0.50 |
| URD Wire: $0.23 |
| Ballast Wire: $0.10 |
| LOW CU BEARING (PER POUND) |
| Sealed Units: $0.15 |
| Ballasts: $0.10 |
| Small Electric Motors: $0.15 |
| Large Electric Motors: $0.15 |
| Alternator: $0.30 |
| Starter: $0.23 |
| Sm Cu Transformers: $0.30 |
| Lrg Cu Transformer: $0.40 |
| LEAD/ZINC (PER POUND) |
| Clean Soft Lead: $0.58 |
| Indoor Range Lead: $0.48 |
| Lead Shots: $0.42 |
| Wheel Weights: $0.10 |
| Lead Acid Car Batteries: $0.10 |
| STAINLESS (PER POUND) |
| 304 Solid/Clip: $0.40 |
| 304 Turnings: $0.24 |
| 309 Solid/Clip: $0.40 |
| 310 Solid/Clip: $0.85 |
| 430 Solids: $0.13 |
| 409 Chrome: $0.12 |
| Irony Stainless: $0.10 |
| FERROUS (PER TON) |
| Sheet Iron: $130.00 |
| Unprepared PNS: $90.00 |
| Unprepared HMS: $90.00 |
| Rebar: $100.00 |
| Clean Sheet: $140.00 |
| Cable: $39.00 |
| Machine Shop Turnings: $31.00 |
| Prepared Plate: $170.00 |
| Rotors & Drums: $200.00 |